Our Services

IMAGEN 7

Tire tests

Tire tests under FMVSS109, FMVSS119, FMVSS139
  • Resistance testing program (Endurance)
  • Tire Measurement Method (FTM)
  • Resistance of tubeless tires to bead separation
  • Tire penetration resistance
  • High-speed performance
  • Performance at low inflation pressure
  • Dynamic tire boost
  • Operating mode of the resistance test, load/speed performance (350km/h)
  • Resistance test program (Endurance)
  • Tire measurement method
  • Procedure for evaluating “airless operation”
  • Resistance testing program (Endurance)

Brake fluid testing

Tests according to National and International regulations, Colombia RT 4983, in accordance with NTC 1721, FMVSS116, ISO 4925, SAE J 1703.

R1. General appearance of the liquid
R2. Boiling point with reflux and wet reflux
R3. Kinematic viscosity at -40 and 100 °C
R4. pH value
R5. Liquid stability at high temperature and
chemical stability
R6. Corrosion
R7: Flow and appearance at low temperatures (-40 and -50) Degrees Celsius
R8. Evaporation
R9. Water tolerance (-40 and 60 °C)
R10. Compatibility (-40 and 60 °C)
R11. Oxidation resistance
R12. Effect on pacifiers
R13. Functional test (simulated service)
R14. Liquid color

Friction material tests

Tests under NTC 5390, NTC 5388, NTC 2405, NTC 2406, NTC 5292, ONU ECE R90, SAE J160, SAE J661, ISO 6310:01, ISO 6312:01

R1. Swelling and growth
R2. Coefficient of friction
R3. Shear strength
R4. Compressibility
R5. Shear strength

Brake cylinder suction cups, hydraulic actuation

Tests according to NTC 1090, SAE J 1601 standards. According to technical resolution 4983

R1. Resistance to fluids at high temperatures
R2. Precipitation
R3. Cycling with pressure and heat in the wheel cylinder
R4. Cycling with pressure and heat in the master cylinder
R5. Low temperature operation
R6. Oven aging
R7. Corrosion resistance
R8. Corrosion resistance in storage

Rubber seals for cylinders of the hydraulic disc brake system of motor vehicles

Tests according to NTC 1509, SAE J 1603 or JIS D 2609 Standard. In accordance with technical resolution 4983

R1. Resistance to liquid at high temperature-Physical stability.
R2. Resistance to liquid at high temperature
Precipitation characteristics – precipitation.
R3. Resistance to high temperatures in dry air.
R4. Piston stroke at room temperature.
R5. Piston stroke at high temperature.
R6. Low temperature leakage.
R7. Cycling in humid storage for corrosion.

Get a quote for your tests with us!

Scroll to Top